Replacement 2 BB9-2 and 2 Fluoride Water Filter PF-2 Compatible with Black Berkey Gravity Water Filtering System

Description

Compatible Models

Interchangeable with Travel, Big, Royal, Imperial and Crown Series and Gravity filter system.
Doulton Super Sterasyl & ATC Super Sterasyl filter, W9361122 & W9361123 system.
Alexapure Pro Water Filtration System
Propur Traveler, Nomad, King, Big Series.
Please note it's a compatible spare part. This filter is not sourced by or sponsored by Berkey. The manufacturer's name and part number have been used only for reference.

Food-grade filtration material

Employs coconut activated carbon block, granular activated carbon and activated alumina as the filter media to ensure excellent reduction performance and better taste.
Not only do we firmly control the filter material but also adopt lead-free and BPA-free materials to produce the filter housing.The premium carbon block can absorb many impurities like sands,rust,sediment, bad taste,and odor.
This product is characterized by uniform particles and a smooth surface to properly reduce chlorine,which is the primary cause of bad taste.Allow water to pass through granular activated carbon for superior taste improvement performance.

How to Prime (PF)-2 Fluoride Filters with Priming Button

Priming with the thick tan washer, known as the priming button is the original method for priming Fluoride Filters. A priming button is included with every Fluoride Filter purchase.

1. With the blue caps in place wash the exterior of each fluoride filter element with water and mild dishwashing soap, then rinse.

2. With clean hands, remove both blue caps from each end of both filter element.

3. Place the rubber priming button (tan colored) onto one end of a fluoride filter and align the hole of the filter with the hole of the rubber washer.

4. Press the priming button up against the sink faucet so that the priming button creates a seal between the faucet and the Fluoride Filter. Place your thumb on top of the faucet to apply pressure, to create a better seal .

5. While holding the priming button against the faucet, turn on the cold water slowly, allowing water to fill the cavity of the filter and flow from the opposite end.

6. Allow water to flow for at least 30 seconds or until water runs clear.

7. Turn the Fluoride filter over and prime the opposite end (reversing the flow of water) repeating steps 3-5 until water runs clear from both directions.

8. To determine if the filter is fully primed, collect the filtered water in a clear glass and hold it up to the light to see if all of the cloudiness is gone from the water, if not continue priming until water is clear.

9. This filter is now primed and ready to install.

10. Repeat priming steps 1-7 for each additional Fluoride Filter.

Replacement for (PF)-2 Fluoride Filter

Cost-effective. Offering a more reasonable supply.

1,000 Gallons for Fluoride Filter (for pair), which will vary based on water quality.
depending on the local water quality

The installation is simple. The precise design promises leak-free fittings. All you need to do is to connect the black filter with the white filter.

(Included with your (PF)-2 Fluoride Filters Bundle are two tan priming button .)

granular activated carbon and activated alumina as the filter media to ensure excellent reduction performance and better taste.

(BB)9-2 Water Filter Black Replacement Filter
Cost-effective.

Offering a more reasonable supply.

Product Dimensions: 2.4 " x 2.4 " x 9.75 " Composition: Black Filters are made of a carbon composite containing high-grade coconut shell carbon combined with a proprietary blend of 5 other types of media. NSF certification: complies with NSF/ANSI standards
6,000 Gallons for Black (BB)9-2 (for pair),
which will vary based on water quality.
The installation is simple. The precise design promises leak-free fittings. All you need to do is to connect the black filter with the white filter.